Metalworking machines are one of the most versatile tools a workshop needs. Thanks to their amazing metal forming capabilities, lathes can be used to make threads, drill holes in metal parts, knurl metal surfaces, produce tapered edges and much more. Metalworking machines are indispensable tools for mechanics because they can be used to repair mechanical parts or even produce them from scratch.
As with all other equipment, safety has the highest priority when working with machine tools. Knowing that lathes can form metals in all forms, you can easily imagine the power of these machines and the damage they can do if you are not careful. It is therefore very important to know the basic safety measures when working with industrial towers.
Remove the cartridge wrench and the wrench
Yes, you need keys and wrenches to prepare your machine tool for the work you plan to do. However, one of the most common causes of accidents on lathes is that people simply forget to take them off the lathe while they are working.
Do not forget to remove the keys and fork wrenches before working with the lathe. If the spindle starts to rotate quickly, the rotation is sufficient to give the socket spanners and adjustable keys enough force to hold you when you leave the car.
Wear short sleeves and avoid loose-fitting clothing
One of the possible causes of accidents when working on metal lathes is wearing long sleeves or loose clothing. Your clothes can accidentally get caught in the spindle and drag you into the process. Remove and observe the rings before using the unit.
Short hair is better than
The risk of long hair is the same as that of loose clothing: it can become entangled in the spindle or material you are working on and make you train. That way short hair is better. But for those who prefer styling long hair, it’s best to tie it in a ponytail and attach it to the back of your head so it doesn’t interfere with your work.
Familiarize yourself with the position of the emergency stop switch.
If you know the position of this button and act in time, you can protect yourself from serious injury if something goes wrong.
Wearing eye protection
It is inevitable that the small pieces of metal you are working on can fly away in all directions. The best way to protect your eyes from this waste is to wear suitable glasses.
Do not use hands to remove rotations from the metal
Don’t forget that you work with metals here and that these metals can be very sharp. Never use your hands to remove them. You can use a brush to clean.
Do not place tools directly on lathes
You may want to keep your tools handy and easily accessible. However, you should never place them directly on the towers, because they can cause unexpected accidents. It is best to use a separate table for your tools.
Steps to be taken when using a categorymachine tool
Switch on the pin for the heating without having already inserted the workpiece. For this warm-up phase, set the spindle speed to 1000 rpm and let it run for about 10 minutes. Make sure that the machine is well lubricated and that you can use this warm-up phase to prepare the mould.
After you have prepared all the tools and warmed up the lathe, you can now place the tool case in the tool holder. Then make sure that the toolbox is securely fastened. Now insert the milling cutter into the supplied toolbox. Make sure he’s secure, so he doesn’t slacken during surgery. Of course it must be ensured that the cutting tool is sharpened in advance to obtain the best result on the lathe.
Drill chuck with insert
If the project you wish to work on requires drilling holes in the workpiece, you must place the chuck in the chuck. The drilling depth can be measured with a measuring device at the rear of the crankshaft.
Z set to zero.
To set the reference point, stop the spindle rotation. Move the milling head near the end of the workpiece. Use the 0.5 inch line as a template and place it between the space between the workpiece and the tool tip. If necessary, adjust it so that it fits the gap exactly. Pull the tool towards you to create the X-axis and set the micrometer wheel to zero. Move it 0.5 inches to the coin, and it’s your Zero Z now.
Setting the zero point X.
The next step is to set the zero point X. This is done by aligning the Z axis of the tool with the top of the spindle in the direction of the workpiece. Place the 0.5 inch block between the workpiece and the tip as before and adjust it until it is firmly in place. Then move the toolbox just in front of the workpiece and zero the micrometer wheel on the x-axis before turning the measuring wheel 0.5 inches away from you. It’ll be zero X.
After these necessary adjustments, your metal lathe is ready for use and can be used for threading, drilling holes in metal parts, serrated metal surfaces, producing tapered edges. However, you may first need to be supervised by a more experienced driver. You can learn more about the intricacies and working methods of a particular metalworking project.
how to use a metal lathe pdf,basic lathe operations
Disclosure: We are a professional review company & our reviews are not biased towards any of the products we review. We test each product thoroughly and give marks to only the very best that is given by our author. We are very independently owned & the opinions expressed here are our own. However, if you purchase anything after clicking the links present in the articles then we get some commissions for it which help maintaining the websites expenses like servers, security etc.